Huawei Nova 7 Pro (JER-AN10) Stock Firmware

Build: JER-AN10-PRELOAD 10.1.1.3(C00R6)
Size: 871.98MB
Type: OTA-MF
dl times: 252

This update allows you to connect to your devices more easily by using the Multi-Device Control Panel. Swipe up from the left or right of the bottom edge when the screen is unlocked to access the Multi-Device Control Panel. Allows you to connect to your devices more easily by using the Multi-Device Control Panel, such as when connecting to your audio input or output device during music and video playback. Swipe up from the left or right of the bottom edge when the screen is unlocked to access the Multi-Device Control Panel.Go to Settings > More connections > Multi-Device Collaboration to try it out. Adds Picture-in-picture mode to Dual-view recording. Touch the Picture-in-picture icon on the Dual-view recording screen to enter this mode. Double-tap the floating picture-in-picture window to switch between the floating window view and the full window view. Improves the user experience with Multi-Window. Improves call experience in certain scenarios. Optimizes compatibility with certain third-party apps. Optimizes the display of certain screens and home screen icons. Integrates Android security patches released in June 2020 for improved system security. For more information on the security of Huawei EMUI system updates, please visit the official Huawei website: https://consumer.huawei.com/en/support/bulletin/2020/6/ 1. This update will not erase your personal data, but we recommend that you back up any important data before updating. 2. For more features, visit Tips. 3. If you encounter any issues during the update, please visit Support (HiCare) or Huawei club, or call the Huawei customer service hotline at 950800.

Full Guide on How to Install Stock Firmware on Huawei Nova 7 Pro JER-AN10

Pre-Requisite :

This Guide is only for Huawei users.

You need MicroSD Card or internal memory space to try any Huawei Stock ROM

A Micro SD card of 8GB or more should be available. It is recommended that The Micro SD card is made by ADATA, Silicon Power, Hp, Sandisk, Kingstone, or Kingmax.

Make sure you have enough battery to run the upgrade process. It is recommended that the power of the battery is more than 40%.

Upgrade operations may erase all your user data. So if there is some important information, you should backup them before the upgrade.

Before flashing, you should unzip the SDupdate_Package.tar.gzfile, and get out UPDATE.APP to do upgrade operation on your SD Card. To unzip, we may sometime share two zip file, Update.zip package always comes with the main update.app which is a complete OS. Where has data file comes with data files from Huawei? Check the below file list.

First of all, Download the Update Package
Recommended: Format the Micro SD card (This operation is optional).
Now Unzip the Update.zip package and
Copy the entire dload folder (with UPDATE.APP in it) to the root directory of the Micro SD card.
Now on your phone, Open the dialer and call ->enter: *#*#2846579#*#* ->ProjectMenu->Software Upgrade->SDCard Upgrade->OK,
Now select the Update.app that you moved to SD Card (root directory).
Now you will see a screen which shows the installation process.
Wait until the installation process completes.
When the progress bar stop, the phone will restart automatically
In case if you have the Data File and you want to flash it, then, first of all, delete the earlier moved update.app from the dload folder
then you can extract the second file (update_data_Xxxxx) from above and move the new update.app to the dload folder.
repeat the same 4-8 Steps above.
That's it! You have Installed Stock Firmware on Huawei Smartphone.