Huawei MediaPad T3 (BG2-W09) Stock Firmware

Build: BG2-W09C128B020
Size: 78.56MB
Type: OTA-MF
dl times: 583

Only! BG2-W09C128B019 upgrade to BG2-W09C128B020 Dear user: the new version fixes Upgrade,third-party,Tablet encryption and other important content, that is, it is recommended that you upgrade experience Key optimization and restoration: (repair) test machine before entering the erecovery previously set built-in storage device or SD card in the NTFS format is less than the size of the installation package, select failed to clear the external SD card installed, a message is displayed, indicating that the clear. (repair) full package and differential package changlog inside, pay attention to the repeated. (repair) eRecovery state, wifi password input error. This message is displayed when the english environment,password word is displayed as pas, is not completely displayed. (repair) SD card and put it into the upgrade package and configuration file of the latest version auto_upgrade.cfg end-of-call loop occurs during the upgrade and the freezing was. (repair) Hota upgrade after the childrens playground, a message is displayed, or the vertical screen. (Optimization) Optimization of opens a slow left and right of the black screen occurs which affects the user experience. (added) after the tablet is encrypted successfully to enter the engineering menu, select a recovery before delivery, is complete and the system detects that data fails to be decrypted. (repair) Fixed an issue where the power supply is removed, the power indicator is off. This update will not erase your personal data, you experience any issues during the update, please visit your Consumer application, or access consumer website( http://consumer.huawei.com/us/index.htm ) .

Full Guide on How to Install Stock Firmware on Huawei MediaPad T3 BG2-W09

Pre-Requisite :

This Guide is only for Huawei users.

You need MicroSD Card or internal memory space to try any Huawei Stock ROM

A Micro SD card of 8GB or more should be available. It is recommended that The Micro SD card is made by ADATA, Silicon Power, Hp, Sandisk, Kingstone, or Kingmax.

Make sure you have enough battery to run the upgrade process. It is recommended that the power of the battery is more than 40%.

Upgrade operations may erase all your user data. So if there is some important information, you should backup them before the upgrade.

Before flashing, you should unzip the SDupdate_Package.tar.gzfile, and get out UPDATE.APP to do upgrade operation on your SD Card. To unzip, we may sometime share two zip file, Update.zip package always comes with the main update.app which is a complete OS. Where has data file comes with data files from Huawei? Check the below file list.

First of all, Download the Update Package
Recommended: Format the Micro SD card (This operation is optional).
Now Unzip the Update.zip package and
Copy the entire dload folder (with UPDATE.APP in it) to the root directory of the Micro SD card.
Now on your phone, Open the dialer and call ->enter: *#*#2846579#*#* ->ProjectMenu->Software Upgrade->SDCard Upgrade->OK,
Now select the Update.app that you moved to SD Card (root directory).
Now you will see a screen which shows the installation process.
Wait until the installation process completes.
When the progress bar stop, the phone will restart automatically
In case if you have the Data File and you want to flash it, then, first of all, delete the earlier moved update.app from the dload folder
then you can extract the second file (update_data_Xxxxx) from above and move the new update.app to the dload folder.
repeat the same 4-8 Steps above.
That's it! You have Installed Stock Firmware on Huawei Smartphone.