Huawei Mate 10 (ALP-AL00) Stock Firmware

Build: ALP-AL00C00B127-SP1 (8.0.0.127),ALP-TL00C00B127-SP1 (8.0.0.127)
Size: 253.85MB
Type: OTA-MF
dl times: 305

This update optimizes Camera and the Navigation dock, the power consumption of certain third-party apps, and increases the speed of grabbing WeChat lucky money. Optimizes the speed of grabbing WeChat lucky money. Enjoy being faster than others in the same network environment. Optimizes the Beauty feature by adding special touches according to the genders of the photographed subjects. Optimizes the accessibility of the Navigation dock, which can now be used in Ultra power saving mode and the notification panel. Simplifies the operation of the status bar. Now, only tapping the status bar to return to the call screen is supported. Improves system stability. Optimizes the system power consumption by controlling the consumption of third-party apps. Fixes an issue where a hidden WLAN with strong signal could not be connected to. Fixes an issue where time zones could not be automatically updated according to location for certain carrier SIMs in countries where multiple time zones exist. Fixes an issue where music being played over in-car Bluetooth could not be paused. Fixes an issue where Kaiseda K8 Locks could not be connected to. Fixes an issue where Camera would occasionally either fail to open, or would display a black screen shortly after opening. 1. This update will not erase your personal data, but we recommend that you back up any important data before updating. 2. If you encounter any issues, you can go to HiCare, Huawei Club, or call the official VIP hotline at 400-930-9300.

Full Guide on How to Install Stock Firmware on Huawei Mate 10 ALP-AL00

Pre-Requisite :

This Guide is only for Huawei users.

You need MicroSD Card or internal memory space to try any Huawei Stock ROM

A Micro SD card of 8GB or more should be available. It is recommended that The Micro SD card is made by ADATA, Silicon Power, Hp, Sandisk, Kingstone, or Kingmax.

Make sure you have enough battery to run the upgrade process. It is recommended that the power of the battery is more than 40%.

Upgrade operations may erase all your user data. So if there is some important information, you should backup them before the upgrade.

Before flashing, you should unzip the SDupdate_Package.tar.gzfile, and get out UPDATE.APP to do upgrade operation on your SD Card. To unzip, we may sometime share two zip file, Update.zip package always comes with the main update.app which is a complete OS. Where has data file comes with data files from Huawei? Check the below file list.

First of all, Download the Update Package
Recommended: Format the Micro SD card (This operation is optional).
Now Unzip the Update.zip package and
Copy the entire dload folder (with UPDATE.APP in it) to the root directory of the Micro SD card.
Now on your phone, Open the dialer and call ->enter: *#*#2846579#*#* ->ProjectMenu->Software Upgrade->SDCard Upgrade->OK,
Now select the Update.app that you moved to SD Card (root directory).
Now you will see a screen which shows the installation process.
Wait until the installation process completes.
When the progress bar stop, the phone will restart automatically
In case if you have the Data File and you want to flash it, then, first of all, delete the earlier moved update.app from the dload folder
then you can extract the second file (update_data_Xxxxx) from above and move the new update.app to the dload folder.
repeat the same 4-8 Steps above.
That's it! You have Installed Stock Firmware on Huawei Smartphone.