Huawei P Smart Dual SIM (FIG-LX1) Stock Firmware

Huawei P Smart Dual SIM (FIG-LX1) Stock Firmware

  • Build: FIG-LX1C782B128 (,FIG-L11C782B128 (
  • Size: 1.70GB
  • Type: FullOTA-MF
  • dl times: 4998

This update optimizes system performance and stability. Improves system performance and stability for smoother operations. 1. This update will not erase your personal data, but we recommend that you back up any important data before updating. 2. If you experience any issues during the update, please call the Huawei customer service hotline or visit an authorized Huawei service center for assistance.

Full Guide on How to Install Stock Firmware on Huawei P Smart Dual SIM FIG-LX1

Pre-Requisite :
  • This Guide is only for Huawei users.
  • You need MicroSD Card or internal memory space to try any Huawei Stock ROM
  • A Micro SD card of 8GB or more should be available. It is recommended that The Micro SD card is made by ADATA, Silicon Power, Hp, Sandisk, Kingstone, or Kingmax.
  • Make sure you have enough battery to run the upgrade process. It is recommended that the power of the battery is more than 40%.
  • Upgrade operations may erase all your user data. So if there is some important information, you should backup them before the upgrade.
  • Before flashing, you should unzip the SDupdate_Package.tar.gzfile, and get out UPDATE.APP to do upgrade operation on your SD Card. To unzip, we may sometime share two zip file, package always comes with the main which is a complete OS. Where has data file comes with data files from Huawei? Check the below file list.
    • First of all, Download the Update Package
    • Recommended: Format the Micro SD card (This operation is optional).
    • Now Unzip the package and
    • Copy the entire dload folder (with UPDATE.APP in it) to the root directory of the Micro SD card.
    • Now on your phone, Open the dialer and call ->enter: *#*#2846579#*#* ->ProjectMenu->Software Upgrade->SDCard Upgrade->OK,upgrade process
    • Now select the that you moved to SD Card (root directory).
    • Now you will see a screen which shows the installation process. Progress Huawei
    • Wait until the installation process completes.
    • When the progress bar stop, the phone will restart automatically
    • In case if you have the Data File and you want to flash it, then, first of all, delete the earlier moved from the dload folder
    • then you can extract the second file (update_data_Xxxxx) from above and move the new to the dload folder.
    • repeat the same 4-8 Steps above.
    • That's it! You have Installed Stock Firmware on Huawei Smartphone.

    Notic: Please keep in mind that, you must flash your Huawei P Smart Dual SIM FIG-LX1 at your own risk and also full responsible with you.

    Please be informed that only share the official firmware WITHOUT ANY modifications.

      Incoming Keywords:

    • Huawei Huawei P Smart Dual SIM stock firmware
    • Huawei FIG-LX1 flash file
    • Huawei FIG-LX1 firmware download
    • Huawei Huawei P Smart Dual SIM flash file download
    • Huawei Huawei P Smart Dual SIM rom update
    • Huawei FIG-LX1 firmware update
    • Huawei Huawei P Smart Dual SIM rom update
    • Huawei firmware downloader tool
    • Huawei Huawei P Smart Dual SIM Sp Flash tool file
  • another Huawei Rom